Homepage » Products » Hydraulic swing gates » SUB

SUBBack

A MODEL FOR EVERY NEED
  • Two versions available, for 125° and 180° opening angles.
SAFE USE
  • Crushing protection guaranteed by two adjustable bypass valves.
SIMPLER INSTALLATION
  • Maintenance is carried out without any need to raise or disassemble the gate.
  • The special foundation case makes it possible to remove the operator without taking off the gate leaf.

D113693 00001 - RIGEL 5 120 V

• Control panel for one or two single-phase 120 V operators up to 0.8 hp (600 W) each.
• Easy programming and diagnosis through LCD display.
• Torque and brakesetting.
• 3 and 4 steps logic with timer to close and hold-to-run control.
• Adjustable delay on opening and on closing.
• Quick wiring through plug-in terminal strips.
• Built-in rolling code receiver and plug-in connector for second receiver.

D113236 00003 - RIGEL 4 UL/CSA

• Control panel for one or two single phase 120 V operators up to 0.5 hp (375 W) each.
• This control panel requires the torque setting to be on the operators.
• 2 and 4 steps logic with timer to close and hold-to-run control.
• Adjustable delay on opening and on closing.
• Self-diagnosis through LED.
• Quick wiring through plug-in terminal strips.
• Plug-in connector for receiver. UL/CSA approved.

KERIG5C002U

Pre-wired 16” x 18” (40 x 45 cm) enclosure box with RIGEL 5 120V control board.
Features: 2 loop detector sockets (1 free exit, 1 safety), 1 test button, easy connection for motors and accessories, 2 120V power outlets, surge arrestor lightning protection, individual circuit breakers for control board and power outlets. NEMA 4x rated.

KERIG4C002U

Pre-wired 16” x 18” (40 x 45 cm) enclosure box with RIGEL 4 UL/CSA control board.
Features: 2 loop detector sockets (1 free exit, 1 safety), 1 test button, easy connection for motors and accessories, 2 120V power outlets, surge arrestor lightning protection, individual circuit breakers for control board and power outlets. NEMA 4x rated.

D113050/110 - SPL 120 V

P123001 00004 - EBP 120

P123001 00019 - EBP 24 120/24 V

D121017 - ECB SX

Left-hand horizontal electric lock. Also available in righthand and vertical versions.

D121016 - ECB DX
RH horizontal electric lock, 12V.

D121018 - ECB vertical
Vertical electric lock, 12 V.

D111501 - ME 120 V

View 360

N733066 00001 - CPS DX

View 360

N733066 00002 - CPS SX

View 360

N733092 - CPS G

N733201 00001 - CID DX

N733201 00002 - CID SX

N733202 00001 - CID G

D610256 - CLS/82

View 360

N728002 - BSC

D730177 - PFS

I101615 - IDROLUX WINTER

D113693 00001 - RIGEL 5 120 V

Control panel for one or two single-phase 120 V operators up to 0.8 hp (600 W) each.

D113236 00003 - RIGEL 4 UL/CSA

Control panel for one or two single phase 120V operators up to 0.5 hp (375 W) each.

KERIG5C002U

Pre-wired 16” x 18” (40 x 45 cm) enclosure box with RIGEL 5 120V control board.

KERIG4C002U

Pre-wired 16” x 18” (40 x 45 cm) enclosure box with RIGEL 4 UL/CSA control board.

D113050/110 - SPL 120 V

Pre-heating board for 1 or 2 LUX, SUB, P4,5-P7 and E5 operators. Can be fitted inside control panels RIGEL 4 UL/CSA, ALCOR UL/CSA.

P123001 00004 - EBP 120

120 Vac gravity electric lock.

P123001 00019 - EBP 24 120/24 V

120/24 Vac gravity electric lock.

D121017 - ECB SX

Left-hand horizontal electric lock. Also available in righthand and vertical versions.

D111501 - ME 120 V

120 V electric lock interface for ECB lock for ARIES UL and ALCOR UL boards.

View 360

N733066 00001 - CPS DX

Bearing foundation case for SUB operator fitting. Maintenance can be carried out without disassembling the gate.

View 360

N733066 00002 - CPS SX

Bearing foundation case for SUB operator fitting. Maintenance can be carried out without disassembling the gate.

View 360

N733092 - CPS G

Bearing foundation case for either left hand or right hand SUB G operator fitting. Maintenance can be carried out without disassembling the gate.

N733201 00001 - CID DX

Foundation case for SUB R DX

N733201 00002 - CID SX

Foundation case for SUB R SX

N733202 00001 - CID G

Foundation case for SUB G only.

D610256 - CLS/82

Release key for SUB model.

View 360

N728002 - BSC

SUB arm outside hinge.

D730177 - PFS

Foundation plate for SUB and SUB G.

I101615 - IDROLUX WINTER

Hydraulic oil for low temperatures, 2 lt can.
Always fill up with oil of the same colour.

1 / 4
Products table
Model Voltage Leaf weight Leaf length
P930012 00007 SUB R UL/CSA DX 120 V up to 1750 lb (800 kg) up to 11’6’’ (3.5 m)
P930012 00008 SUB R UL/CSA SX 120 V up to 1750 lb (800 kg) up to 11’6’’ (3.5 m)
P930010 00007 SUB G UL/CSA DX 120 V up to 1750 lb (800 kg) up to 11’6’’ (3.5 m)
P930010 00008 SUB G UL/CSA SX 120 V up to 1750 lb (800 kg) up to 11’6’’ (3.5 m)