Homepage » Products » Hydraulic swing gates » LUX BT
LUX BTBack
• Universal control panel for one or two series LUX BT motors
• Slowing on opening and closing managed by an absolute encoder which, combined with the amperometric detection ensures maximum anti-crushing safety.
• Complete with incorporated two-channel receiver, predisposed for serial management, back-up battery and electric lock.
• Full control of programming by means of the digital display and three simple buttons.
• Extremely simple to install and service thanks to the SELF-DIAGNOSIS (automatic detection of failures), and AUTOSET (automatic setting of the operating parameters) functions and the extractable terminals.
• Compatible with EeLink protocol, can therefore be programmed using Proxima.
24 Vdc battery backup system for PHOBOS BT, PHOBOS BT L, IGEA BT. It includes a charger board that activates the batteries when power is off and charges the batteries when power is on.
Circuit board for direct connection of wiegand accessories (such as SELETTO, COMPAS SLIM, etc) to the control units QSC D MA, LIBRA C MA, LIBRA C MV, LIBRA C LX, VENERE D, LEO D MA, LEO MV, RIGEL 5 and ALTAIR P.
Left-hand horizontal electric lock. Also available in righthand and vertical versions.
D121016 - ECB DX
RH horizontal electric lock, 12V.
D121018 - ECB vertical
Vertical electric lock, 12 V.
D113715 00002 - LIBRA C LX
Control unit
P125005 - BT BAT
24 Vdc battery backup system for PHOBOS BT, PHOBOS BT L, IGEA BT.
P111408 - SCS WIE
Circuit board for direct connection of wiegand to the control units
P111376 - SCS 1
Serial connection board for QSC D MA, LIBRA C MA, LIBRA C MV, LIBRA C LX, VENERE D, LEO D MA, LEO MV, RIGEL 5 and ALTAIR P.
D111761 - ME BT
12/24 Vac electric lock interface for ECB locks with BT operators.
D121017 - ECB SX
Left-hand horizontal electric lock. Also available in righthand and vertical versions.
P123001 00013 - EBP 24
24Vac electric lock with 230/24V transformer to be inserted in the control panel
N999417 - CABLE LX BT
Power supply cable for LUX BT. Rolls of 100 m.
N999443 - PL LX BT
Anchor plate used to weld brackets to masonry pillars for LUX BT.
| Model | Voltage | Leaf weight | Leaf length |
|---|---|---|---|
| P935080 00001 LUX BT 2B | 24 V | up to 660 lb (300 kg) | up to 10’ (3 m) |
| P935083 00001 LUX G BT 2B | 24 V | up to 1750 lb (800 kg) | up to 16’ (5 m) |